PORSCHE CAYENNE TURBO AC ROD
Can't find what you need? Try browsing the Accessories or Exploded Diagrams!<-- Try narrowing by car using the menu to the left.
Dual-conical air intake system is a direct high-performance replacement for the factory air box
Features:
Fits all Porsche 997 turbo vehicles (2006-2009)
High performance dual-conical air filters are included
Uses dry-style filters that do not require oiling; simply wash with warm water and reuse
Improves power across the rpm range; noticeable increase in throttle response and acceleration
Simple diy installation with common tools
All fabspeed performance products are backed by the fabspeed lifetime limited warranty
General Fitment 911 2005-08
The h11 bolt (wmc7 and wmc6) is a high quality, aircraft standard fastener. Under racing conditions, we suggest that the h11 bolts be changed periodically.
All bolts should be lubricated under the heads as well as on the threads. We recommend the bolt lube supplied with the rods, or as an alternative, a molybdenum base paste mixed with engine oil.
The preferred method to torque the bolt is by using the stretch figure 60,75 nm (3/8 sps - wmc6 9,65mm).
Fitment:
Gt2 (01-05) / turbo (01-05) / GT2 (96-98) / turbo (95-98) / cup-race (94-98) / rsr (96-97) / rs (95-96) /
C4s (96-98) / c4 (95-98) / c2s (96-98) / c2 (94-98) / 968cs (93-95) / 968 (92-95) / turbo 3.6 (93-94) / turbo 3.3 (91-92) / cup-race (90-93) ...(choose a part on the right to read more)
General Fitment 944 1982-85 944 1985-88 944 1989-91 911 TURBO/GT2 2001-05 911 1994-98 968 1992-95 911 1989-94 911 1987-89 911 1984-86 911 1978-83 930 1975-77 911 1974-77 911 1970-73 911 1965-69
Kit includes:
Software (fast load), FVD TUV muffler (200 cell catalytics), sport headers, sport turbochargers, bmc sportfilter
Endtips bes 997 160 41s must be ordered seperatly.
Tuning:
Max. Power - 448kw (610hp) @ 6000rpm
Max. Torque - 805nm (594lbf ft) @ 4750rpm
Max. Speed - 335km/h
Max. Rpm - 7100rpm
Acceleration 0-100km/h - 3.4s
In different situations with tiptronic cars the maximum power will be 580hp. But the maximum power of the engine stays at 610 hp. To protect the transmission the tiptronic dme will regulate the power to maximum 580 hp.
We program our ecu's with the following modifications in mind:
Removal of the top speed limiter
Increasing the rev limiter
Modifying ignition timi...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2007-09
$14,076.70
Make a selection
Bolt-on replacement outlet tips for factory and aftermarket exhaust systems
Features:
Fits all Porsche 997 turbo vehicles (2006-2009)
Available in polished of black chrome finishes - please specify finish when ordering
Constructed from high-quality 14-16 gauge t304 stainless steel
Simple diy installation
All fabspeed performance products are backed by the fabspeed lifetime limited warranty
General Fitment 911 TURBO/GT2 2007-09
Use only when already connecting rods with sps-carr-6 was delivered!
All other connecting rod needs to be sent to carrillo using this screw!
The s connecting rod bolt (sps-carr-6) needs to be replaced under race conditions only at every third overhauling the engine.
When replacing the screw lubricate the screw head and the thread. We recommend using a mixture of molybdenum-based paste with motor oil.
Torque 89 nm (65 foot pounds)
Fits: GT2 (96-98), turbo (95-98), cup-race (94-98), rsr (96-97), rs (95-96), c4s (96-98), c4 (95-98), c2s (96-98), c2 (94-98), turbo 3.6 (93-94), turbo 3.3 (91-92), cup-race (90-93), turbo-look (91-94), rsr (92-92), rs (92-92), c4 (89-94), c2 (90-94), 916 (70-76), 914-6 (70-...(choose a part on the right to read more)
General Fitment 911 1994-98 911 1989-94 914 1970-76 911 1970-73
Stainless steel outlet tips replace the factory outlets for a sportier look and finish; available in polished and black chrome finishes
Features:
Fits all Porsche 997.2 turbo vehicles (2010-2012)
Available in polished or black chrome finish - specify choice when ordering
Constructed from high quality 14-16 gauge, c.n.c. Mandrel bent t304l stainless steel
Simple diy installation with no cutting or welding required
All fabspeed performance products are backed by the fabspeed lifetime limited warranty
General Fitment 911 TURBO/GT2 2010-13
This adapter is needed to mount the big red caliper from the 965 or 993 turbo to a 1970-89 911. Complete with 10.9 grade m12 x 30 x 1.5 mm (din 912) galvanized mounting bolts and lock washers. Sold individually. 2 necessary per axle. Please note: aluminum corrodes in contact with salt and other environmental influences. For motorsport use only!
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.
General Fitment 911 1970-73
From $186.48
Make a selection
The moshammer evo 2 front chin spoiler blends a bit of Porsche heritage into its design with canard style winglets. This effective design transforms turbulent air into a more laminar flow, creating added downforce. Porsche active aerodynamics remains fully functional in all 3 positions and the evo 2 chin spoiler secures seamlessly into the factory locations. The evo 2 spoiler's design offers a more aggressive look but also blends perfectly with other design elements like the side skirts and rear spoiler. This is an ideal addition for a leased vehicle or for those looking to return the car to its original appearance in the future. When added to other elements of either the evo rs (991.2 turbo/s) or downforce rs...(choose a part on the right to read more)
$1,386.00
Make a selection
Improves aerodynamic efficiency and reduces the wind noise that the a-pillar gutters make at higher speeds. Comes with everything needed to make installation simple.
Fits: GT2 (96-98), turbo (95-98), cup-race (94-98), rsr (96-97), rs (95-96), c4s (96-98), c4 (95-98), c2s (96-98), c2 (94-98), turbo 3.6 (93-94), turbo 3.3 (91-92), cup-race (90-93), turbo-look (91-94), rs (92-92), c4 (89-94), c2 (90-94), turbo 3.3 (78-89), turbo 3.0 (75-77), 3.2 (84-89), SC 3.0 (78-83), 3.0 Carrera (76-77), rs 2.7 (74-76), 911 2.7 (74-77), rs (73-73), 911s (70-73), 911tk (73-73), 911tv (72-73), 911te (72-73), 911e (70-73), 911t (70-71), 911l (68-68), 911s (67-69), 911e (69-69), 911t (68-69), 911 (65-68)
General Fitment 911 1994-98 911 1989-94 911 1970-73
From $276.10
Make a selection
Made of polyurethane so they will not chip or crack like fiberglass, and are flexible enough to survive small impacts. Simple installation without any modifications to the original bodywork. Sold as a set (left and right). Not for wide body cars (993 turbo or turbo-look). Please note: these are aftermarket products. All aftermarket products need to be prepped, sanded, gaps checked / filled and painted. We only recommend professional installation with a shop that has aftermarket bodywork experience.
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.
Front bumper air vent grill an important component for both cooling and aerodynamics. Ensuring the rapid removal of hot air optimized unit cooling front bumper rs grill for all Porsche 997 Carrera models incl. 4s / GTS / GT3 / turbo
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.
Rs 1973 carbon-kevlar ducktail
- production from OEM manufacturer
- highest quality standard
- perfect fitment
- light (3,7 kg) and stable
- fits all 911 models ( for 964 models you must use the brackets of the 964 turbo (965 512 019 00grv und 020 00grv))
Mounting points like factory, including all threads.
Fits: rs (92-92), c4 (89-94), c2 (90-94), 3.2 (84-89), SC 3.0 (78-83), 3.0 Carrera (76-77), rs 2.7 (74-76), 911 2.7 (74-77), rs (73-73), 911s (70-73), 911tk (73-73), 911tv (72-73), 911te (72-73), 911e (70-73), 911t (70-71), 911l (68-68), 911s (67-69), 911e (69-69), 911t (68-69), 911 (65-68)
General Fitment 911 1989-94 911 1970-73
$2,010.62
Make a selection
The moshammer vented rear diffuser with fins is an aggressive design that reduces aerodynamic drag. This vented diffuser allows air that is trapped by the rear bumper to exit, allowing for greater top end performance. The design also incorporates 5 fins that improve laminar airflow by reducing turbulence. Moshammer manufactured this as a direct replacement, so it secures seamlessly to the factory locations with the original hardware. This is an ideal addition for a leased vehicle or for those looking to return the car to its original appearance in the future. When added to other elements of the evo rs (991.2 turbo/s) package, the result is a confident, cohesive stance with balanced downforce. Features: vented f...(choose a part on the right to read more)
$1,844.70
Make a selection
Kit includes: 2 x sport motronic dme (ecu) exchange 2 x sport airfilter 1 x sport exhaust system genuine: engine - v10 cylinder capacity - 5733ccm compression ratio - 12,0:1 max. Power - 450kw (612hp) @ 8000rpm max. Torque - 590nm @ 5750rpm max. Speed - 330km/h max. Rpm - 8400rpm acceleration 0-100km/h - 3.9s tuning: max. Power - 496kw (675hp) @ 8000rpm max. Torque - 670nm (495 lbf ft) @ 6000rpm max. Speed - 345km/h max. Rpm - 8600rpm acceleration 0-100km/h - 3.7s FVD dme / ecu programming philosophy: for 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. Our deep understanding of the flat 6 Porsche engine naturally led to our engine management software. ...(choose a part on the right to read more)
$17,032.10
Make a selection
High performance dual-conical cold air intake with carbon fiber heat shield replaces the factory air box for improved cold air induction and increased power and sound
Features:
Fits all Porsche 997.2 turbo / turbo s vehicles (2010-2012)
Dual-conical air intake system is a direct replacement upgrade for the factory airbox
Significant horsepower and torque improvements
Includes dual dry-style air filters which do not require oiling; simply wash with warm water and reuse
Includes carbon fiber heat shield to prevent engine heat from entering intake
Simple bolt-on installation; no cutting or welding required
All fabspeed performance products are backed...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2010-13
From $895.00
Make a selection
Very aggressive "straight-pipe" system which replaces/bypasses the factory muffler
Features:
Fits all Porsche 997 turbo vehicles (2006-2009)
Includes 200-cell hjs sport cats for maximum flow and performance
Saves 45 lbs from the rear of the vehicle
Available with polished or black chrome deluxe quad style tips - please specify color choice when ordering
Constructed from high-quality 14-16 gauge c.n.c. Mandrel-bent t304l stainless steel for optimum flow and maximum durability
Direct replacement for factory mufflers
All fabspeed performance products are backed by the fabspeed ...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2007-09
$2,795.00
Make a selection
Genuine:
Engine - 6 cylinder boxer twin-turbo
Capacity - 3600ccm
Compression ratio - 9,0:1
Max. Power - 456kw (620hp) @ 6500rpm
Max. Torque - 700nm (516lbf ft) @ 2250-5500rpm
Max. Speed - 330km/h
Max. Rpm - 6800rpm
Acceleration 0-100km/h - 3.5s
Tuning:
Max. Power - 485kw (660hp) @ 6500rpm
Max. Torque - 750nm (553lbf ft) @ 4500rpm
Max. Speed - 335km/h
Max. Rpm - 7000rpm
Acceleration 0-100km/h - 3.4s
FVD dme / ecu programming philosophy:
For more than 20 years, FVD-Brombacherhas been setting the standard for Porsche engine management software tuning. FVD-Brombacherhas perfected the art of Porsche tuning making substantial gains in horsepower and torque, all while retaining the drivability ...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2010-13
$1,912.90
Make a selection
Kit includes:
Software (fast load), FVD TUV version sport muffler (200 cell catalytics), sport headers, sport turbochargers, bmc sportfilter
Endtips bes 997 160 41s must be ordered seperatly.
Tuning:
Max. Power - 448kw (610hp) @ 6000rpm
Max. Torque - 805nm (594lbf ft) @ 4750rpm
Max. Speed - 335km/h
Max. Rpm - 7100rpm
Acceleration 0-100km/h - 3.4s
In different situations with tiptronic cars the maximum power will be 580hp. But the maximum power of the engine stays at 610 hp. To protect the transmission the tiptronic dme will regulate the power to maximum 580 hp.
FVD dme / ecu programming philosophy:
removal of the top speed limiter
increasing the rev limiter
modifying ignition timing...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2007-09
$13,971.04
Make a selection
Genuine:
Engine - 6 cylinder boxer twin-turbo
Capacity - 3600ccm
Compression ratio - 9,0:1
Max. Power - 390kw (530hp) @ 6500rpm
Max. Torque - 680nm (502lbf ft) @ 2200-4500rpm
Max. Speed - 329km/h
Max. Rpm - 6800rpm
Acceleration 0-100km/h - 3.7s
Tuning:
Max. Power - 507kw (690hp) @ 6500rpm
Max. Torque - 870nm (642lbf ft) @ 4500rpm
Max. Speed - 350km/h
Max. Rpm - 7000rpm
Acceleration 0-100km/h - 3.2s
FVD dme / ecu programming philosophy:
For more than 20 years, FVD-Brombacherhas been setting the standard for Porsche engine management software tuning. FVD-Brombacherhas perfected the art of Porsche tuning making substantial gains in horsepower and torque, all while retaining the drivabi...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2007-09
$19,415.07
Make a selection
Genuine:
Engine - 6 cylinder boxer twin-turbo
Capacity - 3600ccm
Compression ratio - 9,0:1
Max. Power - 390kw (530hp) @ 6500rpm
Max. Torque - 680nm (502lbf ft) @ 2200-4500rpm
Max. Speed - 329km/h
Max. Rpm - 6800rpm
Acceleration 0-100km/h - 3.7s
Tuning:
Max. Power - 426kw (580hp) @ 6500rpm
Max. Torque - 750nm (553lbf ft) @ 4500rpm
Max. Speed - 335km/h
Max. Rpm - 7000rpm
Acceleration 0-100km/h - 3.5s
FVD dme / ecu programming philosophy:
For more than 20 years, FVD-Brombacherhas been setting the standard for Porsche engine management software tuning. FVD-Brombacherhas perfected the art of Porsche tuning making substantial gains in horsepower and torque, all while retaining the drivability ...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2007-09
$1,923.90
Make a selection
Hawk hps rear brake pads Porsche 911 69-88
Hps - high performance street disc brake pads are world renowned for increasing stopping power on your street legal vehicle. Increasing the performance of your vehicles braking system is easy when you choose hawk performance_s hps braking compound. This unique ferro-carbon formula was developed for street performance using the safety and quality of aerospace and motorsports severe-duty friction technology.
the high performance street compound offers a higher coefficient of friction over stock brake pads and can provide you 20-40% more stopping power and higher resistance to brake fade than most standard replacement pads. Less fade means you_ll have a highl...(choose a part on the right to read more)
General Fitment 911 1965-69
The next evolutionary step in sport exhausts has arrived. The titan series sport exhaust for the 997 twin turbo. The titan series is a line that showcases the best of the best in exhaust technology and design.
The titan series system was introduced in order to offer consumers the absolute best exhaust products utilizing the latest manufacturing methods and exotic materials. The titan series for the 997 twin turbo is the showcase unit for the titan series line-up. Constructed from 625 inconel, a superalloy commonly used in f1 racing and aerospace due to its lightweight characteristics and ability to perform in the worlds most forbidding environments, the titan series is the lightest most advanced system ...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2007-09
$12,555.00
Make a selection
An excellent performance upgrade. Lightened steel flywheels are susceptible to shattering under aggressive driving conditions. Because aluminum is lighter than steel, clutch masters is able to produce aluminum flywheels utilizing stock dimensions. Aluminum flywheels are perfect for road racers looking for quicker revs. It is also a nice complement for turbocharged cars experiencing lag.
General Fitment 911 2005-08
$1,208.93
Make a selection
Hawk hps front brake pads Porsche 993 (turbo/turbo look) 93-98
Hps - high performance street disc brake pads are world renowned for increasing stopping power on your street legal vehicle. Increasing the performance of your vehicles braking system is easy when you choose hawk performance_s hps braking compound. This unique ferro-carbon formula was developed for street performance using the safety and quality of aerospace and motorsports severe-duty friction technology.
the high performance street compound offers a higher coefficient of friction over stock brake pads and can provide you 20-40% more stopping power and higher resistance to brake fade than most standard replacement pads. Less fade means...(choose a part on the right to read more)
General Fitment 911 1989-94
Genuine: engine - 6 cylinder boxer twin-turbo capacity - 3600ccm compression ratio - 9,0:1 max. Power - 390kw (530hp) @ 6500rpm max. Torque - 680nm (502lbf ft) @ 2200-4500rpm max. Speed - 329km/h max. Rpm - 6800rpm acceleration 0-100km/h - 3.7s tuning: max. Power - 449kw (610hp) @ 6500rpm max. Torque - 780nm (575lbf ft) @ 4500rpm max. Speed - 340km/h max. Rpm - 7000rpm acceleration 0-100km/h - 3.4s FVD dme / ecu programming philosophy: for more than 20 years, FVD-Brombacherhas been setting the standard for Porsche engine management software tuning. FVD-Brombacherhas perfected the art of Porsche tuning making substantial gains in horsepower and torque, all while retaining the drivability and most importantly r...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2007-09
From $7,602.10
Make a selection
© 2024 Automobile Atlanta Inc.
505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844
|